Side Rail Use; Detachable Arm Board Use - OAKWORKS MEDICAL PRODUCTS PG Series User Manual

DIRECTIONS FOR USE
S I D E R A I L U S E
TO LOWER SIDE RAILS
Push side rail in lightly towards the center of the
table, then push locking knob down towards the
table base. Fold side rails down and under the
table.
D E T A C H A B L E A R M B O A R D U S E (U L T R A S O U N D O N L Y)
CAUTION
This product can be used on any of Oakworks
ultrasound tables with a T-Rail Adapter and can
support a variety of positioning configurations.
INSTALLING DETACHABLE ARM BOARDS
1. Make sure T-rail
adapter is attached.
Slide clamp onto
T-Rail as shown.
Do not put excessive weight or pressure on the Arm Board.
2. Insert pin on arm
board into the hole
on top of the clamp.
TO RAISE SIDE RAILS
Grasp side rail and rotate to the raised position.
When fully up, the side rail will lock into position.
Check that the rail is locked by applying light out-
ward pressure.
3. Tighten the clamp
to secure the arm
board by rotating
the handle clock-
wise
22