Logging In Via Usb Port - ABB RELION REX610 Manual

Section 6
Using local HMI
6.1.1
22
VIEWER
Enter password:
= 1
***
GUID-4E468F3E-CE05-487B-8B80-56DDEB1FB390 V1 EN-US
Figure 4: Entering password
5.
Press to confirm the login.
•
To cancel the procedure, press
Error
Wrong password
GUID-FC04114D-33C9-42CC-AB28-395C4890BA4B V1 EN-US
Figure 5: Error message indicating wrong password
The current user level is shown on the display's upper right corner
in the icon area.
When local override is disabled, the Login page is shown in case of
any LHMI activity.

Logging in via USB port

The relay can be configured via the USB port.
1.
Select Main menu/Configuration/System/Enable USB and press
2.
Select True and press
3. Connect a computer with PCM600 to the relay's USB port.
4. Enter the credentials, if prompted.
• If the Remote override parameter is "False", the LHMI prompts for
username and password credentials before the relay is mounted as a
USB device in the connected computer. The rights granted to engineer
the relay via the USB port depend on the role of the user account used
to log in. See Chapter
• If the Remote override parameter is "True", username and password
credentials are not prompted in the LHMI. In this case, the rights
.
to enable the relay to detect the USB connection.
Local user account management
Cyber Security Deployment Guideline
2NGA000818 A
.
for details.
REX610