Document Conventions - ABB RELION REX610 Manual

2NGA000818 A
1.4.2
REX610
Cyber Security Deployment Guideline
The information icon alerts the reader of important facts and
conditions.
The tip icon indicates advice on, for example, how to design your
project or how to use a certain function.
Although warning hazards are related to personal injury, it is necessary to
understand that under certain operational conditions, operation of damaged
equipment may result in degraded process performance leading to personal injury
or death. Therefore, comply fully with all warning and caution notices.

Document conventions

A particular convention may not be used in this manual.
• Abbreviations and acronyms are spelled out in the glossary. The glossary also
contains definitions of important terms.
• Push button navigation in the LHMI menu structure is presented by using the
push button icons.
To navigate between the options, use
• Menu paths are presented in bold.
Select Main menu/Settings.
• LHMI messages are shown in Courier font.
To save the changes in nonvolatile memory, select Yes and press
• Parameter names are shown in italics.
The function can be enabled and disabled with the Operation setting.
• Parameter values are indicated with quotation marks.
The corresponding parameter values are "On" and "Off".
• Input/output messages and monitored data names are shown in Courier font.
When the function starts, the START output is set to TRUE.
• Values of quantities are expressed with a number and an SI unit. The
corresponding imperial units may be given in parentheses.
• This document assumes that the parameter setting visibility is "Advanced".
•
A functional earth terminal is indicated in figures with the symbol
• Equipment protected throughout by double insulation or reinforced insulation
(equivalent to class II of IEC 61140) is indicated in figures with the symbol
.
Introduction
and .
Section 1
.
.
5