Fisher & Paykel ACTIVESMART RF172G Installation Manual/User Manual page 35

Table of Contents

Advertisement

PROBLEM
Water in the
vegetable bins.
Exterior of
cabinet is warm.
Warm spot
on central
door seal.
Condensation
on outside of
refrigerator/
freezer.
Condensation
inside fresh food
compartment.
Door handles
out of
alignment.
Tray/bin does
not slide in and
out evenly.
Appliance
operating
inefficiently.
Cannot adjust
temperature
in frozen food
compartment.
TROUBLESHOOTING
POSSIBLE CAUSES
Condensation is formed by
the water produced by fruit
and vegetables.
This is normal.
You may feel a warm spot
at times on the central
seal between the two
refrigerator doors.
Not unusual during periods of
high humidity.
Frequent or long
door openings.
Door gasket leaking.
Not unusual during periods of
high humidity.
With time and usage,
movement may occur.
Packaging trapped.
Runners not extending fully.
Accumulation of dust
on or behind the rear
compartment cover.
Either Bottle chill, fast freeze
or ice boost is activated
WHAT TO DO
A small amount of condensation
is beneficial for fruit and
vegetable storage.
Wipe out water with a cloth.
This is perfectly normal and is part
of the normal refrigerator operation.
Wipe dry.
Minimise door openings.
Check that gasket is sitting flat and
sealing tightly.
Wipe dry.
Refer to section 'Installation
instructions'.
Check to ensure no food or
packaging is trapped behind
the tray/bin.
Holding onto sides of tray/bin,
extend the runners fully by using a
firm pull — this will reset the runner.
Refer to section 'Cleaning and care'.
If problem persists please contact
Customer Care.
Deactivate Bottle chill, fast freeze or
ice boost if function is not desired
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Activesmart rf172gdux1

Table of Contents