Fisher & Paykel ACTIVESMART RF172G Installation Manual/User Manual page 12

Table of Contents

Advertisement

Positioning your refrigerator
Your Fisher & Paykel ActiveSmart™
refrigerator is fitted with front and rear
rollers to allow you to easily move your
refrigerator forward and backward.
Avoid moving your refrigerator sideways
to prevent damaging the rollers or the
floor covering surface.
Your refrigerator will arrive with the front feet wound up making moving the product
1
into its final location easy.
Roll the refrigerator into its final position making sure there is the correct air gap
2
between the product and surrounding cabinetry. See minimum clearance in cabinetry
dimensions table.
Adjust the front feet down until the refrigerator is leaning backward with the front
3
approximately 3/8" (10mm) higher than the back. This will ensure a good door
closing action.
Levelling of refrigerator doors
Open the door that is out of alignment.
Lift the door upwards.
Clip the spacer onto the centre hinge pin A.
Close the door to recheck alignment.
10
INSTALLATION INSTRUCTIONS
Example only
Lower the front of
the refrigerator
Refrigerator feet
Raise the front of
the refrigerator
A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Activesmart rf172gdux1

Table of Contents