Table of Contents
Advertisement
ACTIVESMART™ OPERATING INSTRUCTIONS
Bottle holder (where fitted)
The bottle holders can be used to store a variety of bottles.
●
●
To position the bottle holder in your refrigerator, slot the back edge of the bottle holder
●
●
onto the back trim of any shelf in the fresh food compartment.
Unused bottle holders can be stacked up on top of one another so they do not take up
●
●
unnecessary shelf space.
Bottles are best stored with the neck of the beverage facing the front of the refrigerator.
●
●
Glass shelves
Standard glass shelves can not be repositioned in your refrigerator.
●
●
Refer to 'Cleaning and care — Shelving' for details on
how to remove the standard glass shelves for cleaning.
Cantilever glass shelves — half-width and full-width
The cantilever glass shelves are designed to be
●
●
strong and versatile.
The half-width and full-width shelves are removable
●
●
and can be repositioned in your refrigerator.
Place the half-width shelves side-by-side when
●
●
you store large items such as platters.
Place the half-width shelves at different levels to
●
●
maximise the storage space when you store items
of varying heights.
To remove for repositioning
Hold the front and back edge of the shelf firmly A.
1
Push the shelf up vertically to dislodge from
2
back support lugs b.
Slide the shelf towards you c.
3
Drip tray
The drip tray is designed to fit into the bottom of the
●
●
water dispenser panel.
To insert the tray ensure the rounded
●
●
sides are fitted into the dispenser
pane first.
The purpose of the tray is to
●
●
capture drips of water that may
fall after dispensing.
The tray can be removed for cleaning.
●
●
A
b
c
Drip tray
23
Advertisement
Table of Contents
