PROBLEM
Water marks
left on
glasses and
cutlery.
Hard water
26
TROUBLESHOOTING
POSSIBLE CAUSE
Rinse aid level or dosage
setting is too low.
WHAT TO DO
Ensure there is rinse aid in dispenser. If
necessary, increase the rinse aid setting
or try using a wash programme with a
higher temperature. See sections 'Using
rinse aid' and 'Wash programme data'.
Increase the rinse aid setting and the
amount of detergent. See section 'Water
hardness and dishwashing'.
If living in an area with very hard
water, consult a plumber on installing a
household water softener.