Fisher & Paykel DW60FC User Manual page 29

PROBLEM POSSIBLE CAUSE
Plastic Not enough detergent,
items are not pre-rinsed.
discoloured
(e.g. stain left
by tomato
sauce).
Display This is normal. The display
flashing while remains on although the
Keylock is on. buttons are disabled.
White stains Not enough detergent.
are left
on dishes;
glasses
have a milky
Rinse aid dosage too low.
appearance.
Dishes, Rinse aid dosage too low.
cutlery have
not dried.
Items removed too soon.
Rinse aid dispenser empty.
(The rinse aid indicators
are lit.)
Glasses Rinse aid dosage too low.
have dull
appearance.
Tea stains Not enough detergent.
or traces of
lipstick have
not been
completely
Wash temperature too low.
removed.
Traces of rust Cutlery is not
on cutlery. sufficiently rustproof.
Glasses Hard water situation.
clouded and
Glasses are not
discoloured;
dishwasher proof.
milky coating
TROUBLESHOOTING
WHAT TO DO
Pre-rinse plastic dishes before
placing in the dishwasher and/or add
more detergent.
Alternatively, using the Rinse programme
after adding dishes may minimise
staining.
No action required.
See section 'Wash programmes and
detergent quantities' for recommended
quantities. You may need to adjust these
to suit the hardness of your water supply.
Increase rinse aid dosage.
See 'Using rinse aid'.
Increase rinse aid dosage.
See 'Using rinse aid'.
After the end of the wash programme,
leave the door ajar and wait for several
minutes to help drying.
Add rinse aid. See section
'Using rinse aid' for instructions.
Increase rinse aid dosage.
See 'Using rinse aid'.
See section 'Wash programmes and
detergent quantities' for recommended
quantities. You may need to adjust these
to suit your particular load.
Select a wash programme with
a higher temperature (see section
'Wash programme data' for information).
Wash by hand.
Increase detergent quantities.
Wash by hand.
25