Door Lock Clearance Adjustment - Fisher & Paykel OB60BCEW1 Service Manual

599390

5.1.2.4 Door Lock Clearance Adjustment

When the door lock adjustments have been made, the latch should be checked for correct
clearance to ensure the door latch will maintain the open position when the door is shut, and will
allow the latch to engage at the required depth when locked in the self-clean setting.
To ensure correct setting, the door should be pulled slightly away from the cavity until the edge of
the latch is level with the door lock block (figure 7).
The distance between the latch and the block should be 1mm (figure 8). If this distance is greater,
then the door lach may not fully engage when closed. If the distance is reduced, then the door
latch may be damaged when the door is closed.
Adjustment to the clearance distance can be made by removing or shimming out the washers
shown in figure 4 (refer page 20).
1mm
Figure 7
Figure 8
22