Location; Set Up - Hoshizaki KML-350MAF Instruction Manual

Modular crescent cuber
Hide thumbs Also See for KML-350MAF:
Table of Contents

Advertisement

3. LOCATION

This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be within +45°F to +100°F; Normal operating water
temperature should be within +45°F to +90°F. Operation of the icemaker, for
extended periods, outside of these normal temperature ranges may affect
production capacity.
For best operating results:
• Icemaker should not be located next to ovens, grills or other high heat producing
equipment.
• Location should provide a firm and level foundation for the equipment.
• Allow 6" clearance at rear, sides and top for proper air circulation and ease of maintenance
and/or service should they be required.

4. SET UP

1) Unpack the Storage Bin, and attach the four adjustable legs provided (bin accessory) to
the bottom of the Storage Bin.
2) Position the Storage Bin in the selected permanent position.
3) Place the icemaker on the top of the Storage Bin.
4) Secure the icemaker to the Storage Bin, by
using the two Universal Braces and the two
bolts provided. See Fig. 2
5) Level the icemaker/Storage Bin in
both the left-to-right and front-to-rear
directions. Adjust the Ice Bin Legs to
make the icemaker level.
6) Replace the panels in their correct
positions.
WARNING
Fig. 2
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kml-350mwf

Table of Contents