Start Up - Hoshizaki KML-350MAF Instruction Manual

8. START UP

1. All parts are factory-adjusted. Improper adjustments may result in failure.
2. If the unit is turned off, wait for at least 3 minutes before restarting the
icemaker to prevent damage to the Compressor.
3. Do not operate the unit in the "WASH" position without water in the Water
Tank.
1) Open the Water Supply Line Shut-off Valve.
2) Remove the Front Panel.
3) Move the toggle Control Switch, on the Control Box, to the "ICE" position.
4) Replace the Front Panel in its correct position.
5) Turn on the power supply and start the washing process for 10 minutes.
6) Turn off the power supply.
7) Remove the Front Panel.
8) Move the Control Switch to the "Service" position. Then move the Service Switch to the
"Drain" position.
9) Replace the Front Panel.
10) Turn on the power supply for 2 minutes to allow the icemaker to drain.
11) Turn off the power supply and remove the Front Panel.
12) Move the Control Switch, on the Control Box, to the "ICE" position.
13) Replace the Front Panel and turn on the power supply.
CAUTION
14