How To Remove Panels; Location - Hoshizaki KML-250MAH Instruction Manual

2. HOW TO REMOVE PANELS - See Fig. 1
a) Front Panel .......... Remove the screw.
b) Top Panel ............ Lift its front up slightly,
c) Side Panel (R) ..... Remove the screw.
d) Insulation Panel ... Lift up slightly, and pull

3. LOCATION

This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be within +45°F to +100°F; Normal operating water
temperature should be within +45°F to +90°F. Operation of the icemaker, for
extended periods, outside of these normal temperature ranges may affect
production capacity.
For best operating results:
• Icemaker should not be located next to ovens, grills or other high heat producing
equipment.
• Location should provide a firm and level foundation for the equipment.
• Allow 6" clearance at rear, sides and top for proper air circulation and ease of maintenance
and/or service should they be required.
Lift up and pull toward
you.
push away, and then lift
off.
Pull slightly toward you,
and lift off.
toward you.
WARNING
9
Fig. 1