Restore Factory Settings - Elitech STC-1000Pro TH Quick Start Manual

6. Alarm
In the following circumstances during operation, the buzzer will give a
"bi-bi-Biii" alarm, and at the same time, the alarm symbol
will appear. Press any button to mute the alarm.
S/N Code
1
2
3
4
5
7. Restore Operation Function

7.1 Restore Factory Settings

When the controller is powered on and in non-setting parameter status,
please press
and release until the screen turns o
equipment to restart automatically and restore to factory settings.
7.2 Restore Wi-Fi Network Settings
If you would like to reconfigure to a new Wi-Fi network, please keep the
equipment in power-on status, press
symbol on the screen flashes. The icon will disappear after the network
restoration is completed.
Please do not power o the equipment during the restoration process.
8. Access to Network (for STC-1000WiFi TH)
STC-1000WiFi TH features a built-in Wi-Fi module that allows you to
remotely view and configure it on the app.
Function
Sensor failure
Temperature alarm high limit
Temperature alarm low limit
Humidity alarm high limit
Humidity alarm low limit
+ + buttons simultaneously on the main controller
automatically. Wait for the
(for STC-1000WiFi TH)
+ buttons and release when the
-13-
on the screen
Socket output status
Outputs terminated
Outputs unchanged
Outputs unchanged
Outputs unchanged
Outputs unchanged