Equipment Installation - Elitech STC-1000Pro TH Quick Start Manual

4.10 Continuous Operating Time - COT
During humidity control, when COT≠0 and output conditions are met, WORK2
socket will work in on-o -on-o .... mode. COT is time on as well as time o .
eg, if COT=10, the WORK2 output socket will turn on for 10 minutes and o for
10 minutes, then repeat.
When COT = 0 and output conditions are met, WORK2 output socket will not
be a ected by COT.
4.11 Backlight Time - BL
BL is the screen display time. When BL=0 indicates display is always on.

5. Equipment Installation

As a safety precaution, it is recommended to power on the equipment
after the installation is completed.
The only installation method is by hanging the equipment. Please check
the installation distance and screw size according to its application scenar-
io before installation.
The schematic diagram of equipment installation is shown below:
Fig. 12
-12-