Table of Contents
Advertisement
When HUB is using, Straight cable should be used.
Ex) Straight Cable Wiring: Connect 1:1 according to the wiring diagram above.
In case of do not using HUB, do not use HUB, when it is connected directly, Cross Cable should be used.
Ex) Cross Cable Wiring: In the above wiring diagram, TD+ and RD+ are changed, and TD- and RD- are
exchanged.
5.3 USB Interface
5.3.1 USB Host
Type
USB Interface
Communication
Transfer Speed
Support Device
Connector Type
5.3.2 USB OTG
Type
Communication Method
Connect Method
5.4 WLAN Specification [Only TOPRP20]
Item
Frequency range
Standards
Antenna
Modulation
Security settings
5.5 RCA Specification [Only TOPRP20]
Type
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: +82-70-465-3366, Fax: +82-31-465-3355, www.m2i.co.kr
Item
EHCI/OHCI Specification Version 1.0, USB2.0/1.1 compatible
Method
Item
USB Interface
Transfer Speed
Supporting OS
Cable Length
Connect Type
64QAM, 16QAM, QPSK, BPSK CCK, DQPSK, DBPSK
WEP40/64, WEP104/128,AES, TKIP
Item
Interface
Video signal
Connector Type
TOPR Series (Process Module) Hardware Manual
Specification
Control/Bulk
480Mb/s
USB Storage (FAT16/FAT32 File Format Available)
Type A (2ch.)
Specification
USB 2.0
Interrupt/Bulk/Isochronous
480Mb/s
Windows 98SE/2000/XP/VISTA/7/10 (32/64bit)
1.5M (recommended to use M2I's option cable)
Micro USB AB, Female
Connect Via USB Front of Display Module
Specification
2.4000GHz～2.4835GHz
IEEE 802.11b/g/n
RP-SMA External Antenna
Specification
CVBS Standard
NTSC, PAL or SECAM video
Composite RCA Jack (Yellow)
13 / 18
Advertisement
Table of Contents
