Table of Contents
Advertisement
Service & Analysis Center Europe
SACE AMS Training Group
NOT CHARGING ( NOTHING HAPPENS IF CHARGER IS CONNECTED )
First of all : Always Check the mechanical condition of all connectors and connections
Check voltage level at R104-
if it is higher than 0,4V when
charger is connected
Check/change R102/103/104,
F100, X101/102/200,
N101, C101/144,R101 (soldering,
electrical and mechanical
Repairhints_nse5_002508
Not charging
lower 0,4V
condition)
OK
PCB faulty
CONFIDENTIAL
NSE-5
Repairhints
30.07.2000
>0,4V
Check/change N100
notOK
Checked by:
AMS TRAINING GROUP
14 (30)
Version 1.0 Approved
Approved by:
SACE
Advertisement
Table of Contents
