Telemetry Started; Telemetry Start Failed; Telemetry Successful; Telemetry Status - Seco Garz & Fricke KarL4 Operating Manual

Telemetry/ Update search
The update search is a special form of telemetry and is therefore not explained separately.

9.4.1 Telemetry started

Telemetry
started

9.4.2 Telemetry start failed

Telemetry
start failed

9.4.3 Telemetry successful

Telemetry
successful

9.4.4 Telemetry status

During a telemetry, various screen outputs appear. These are listed as follows:
Telemetry
running
Telemetry
Rcv Lst XXX
Telemetry
Snd Lst XXX
Telemetry
Rcv File YYY
Telemetry
host unavailable
Telemetry
error: 0xHH
Telemetry has been started. This display disappears automatically. During the
telemetry/update search, there are further screen outputs. If successful,
continue with telemetry.
S1 –
S2 –
Unable to start telemetry.
S1 – Next menu item. Main menu
S2 –
Telemetry was carried out successfully.
S1 – Next menu item. Main menu
S2 –
Telemetry is active. No specific task is executed.
EVA-DTS list XXX is received.
EVA-DTS list XXX is being sent.
File YYY is received.
Unable to reach host.
Telemetry failed with error code 0xHH.
25 of 28