7 GETTING STARTED
A SIM card is not required as the KarL4 is fitted with a SIM chip.
▪
When using the "age verification" function, insert the dealer card (SIM socket with white
▪
border).
Figure 13 – KarL4 within the case
Connect NFC antenna
▪
Connect mobile antenna
▪
Connect contact unit
▪
Connect controller (MDB)
▪
Switch on vending machine
▪
Mobile connection is established if it beeps twice after switching on and the green
▪
modem status modem status LED is on longer than it is off.
Start telemetry via the KarL4 service menu. This will assign a terminal ID to the unit, load
▪
an EMC configuration, and update it if necessary.
LED modem status (green)
17 of 28