Table of Contents
Advertisement
KarL4 drilling template Sielaff SC (Art. no. 400-2788R)
▪
This is a template specially designed for Sielaff SC vending machines. The contact edges
to be used are the decorative panel and the advertising panel on the vending machine
door. Using the template not only ensures the correct positioning of the holes in relation
to each other but also the correct position of the antenna itself.
Contact edge for
top edge of advertising panel
After fixing the NFC antenna with the 4 screws, the connection cables are connected and laid.
The earthing lug of one of the antenna cables must be connected to the housing of the vending
machine in an electrically conductive manner.
Finally, the label for operator guidance is attached to the front of the door.
Figure 11 – Front of vending machine door
Figure 10 – Sielaff drilling template
Figure 12 – Back of vending machine door
Contact edge for
right edge of
decorative panel
15 of 28
Advertisement
Table of Contents
