Jeep WRANGLER 4Xe 2022 Manual page 38

36 GETTING TO KNOW YOUR INSTRUMENT PANEL
I C D
NSTRUMENT LUSTER ESCRIPTIONS
1. Tachometer
Indicates the engine speed in revolutions

per minute (RPM x 1000).
CAUTION!
Do not operate the engine with the tachometer
pointer in the red area. Engine damage will
occur.
2. Engine Coolant Temperature
This gauge shows the engine coolant

temperature. The gauge pointer will likely
show higher temperatures when driving in
hot weather, up mountain grades, or in
heavy stop and go traffic. If the red Warning
Light turns on while driving, safely bring the
vehicle to a stop, and turn off the engine.
DO NOT operate the vehicle until the cause
is corrected.
WARNING!
A hot engine cooling system is dangerous. You or
others could be badly burned by steam or boiling
coolant. You may want to call an authorized
dealer for service if your vehicle overheats.
WARNING!
Driving with a hot engine cooling system could
damage your vehicle. If the temperature gauge
reads "H" pull over and stop the vehicle. Idle the
vehicle with the air conditioner turned off until
the pointer drops back into the normal range.
If the pointer remains on the "H", turn the
engine off immediately and call an authorized
dealer for service.
3. Instrument Cluster Display
The instrument cluster display features a

driver interactive display. When the appro-
priate conditions exist, this display shows
messages Ú page 36.
4. Fuel Gauge
The pointer shows the level of fuel in the

fuel tank when the ignition is in the ON/RUN
position.
The fuel pump symbol points to

the side of the vehicle where the
fuel door is located.
5. Power/Charge Gauge
This gauge represents the source of the

power utilized to accelerate the vehicle.
The green outer ring represents the High
Voltage (HV) battery output during accelera-
tion, and input power during regeneration.
The yellow inner ring represents the engine
output power.
INSTRUMENT CLUSTER DISPLAY
Your vehicle is equipped with an instrument cluster
display, which offers useful information to the
driver. With the ignition in the OFF mode, opening/
closing of a door will activate the display for
viewing, and display the total miles or kilometers in
the odometer. Your instrument cluster display is
designed to display important information about
your vehicle's systems and features. Using a driver
interactive display located on the instrument
panel, your instrument cluster display can show
you how systems are working and give you
warnings when they are not. The steering wheel
mounted controls allow you to scroll through and
enter the main menus and submenus. You can
access the specific information you want and
make selections and adjustments.