Jeep WRANGLER 4Xe 2022 Manual page 27

NOTE:
For vehicles equipped with an 8.4-in radio screen,
press the check box next to the setting "Enable
Schedule" until a check mark appears in the box,
then press the "Weekdays" or "Weekends"
schedule to adjust the start and end time of
desired charging. You can also choose "Charge
Until Full" instead of choosing an end time,
allowing the vehicle to continue to charge until the
battery is full.
If "Charge Until Full" is selected, the vehicle must
be plugged in within five minutes of the start time.
The following are situations in which "Charge Until
Full" may not be honored:
If selected for five days (Monday through

Friday), and the vehicle is plugged in five or
more minutes after the start time on any of
those days, "Charge Until Full" will not be
honored for that day. "Charge Until Full" will
resume on the next day at the scheduled time.
If there are multiple plug/unplug events after

first being plugged in within five minutes,
"Charge Until Full" will not be honored for
that day.
If other schedules (Charge Interval, etc.) are set

at a later time in addition to "Charge Until Full"
being selected, and the vehicle is plugged in
after five minutes of the start time, "Charge Until
Full" will not be honored for that day. The next
available schedule will be followed.
NOTE:
If the charging schedule is not enabled, the

vehicle will charge whenever plugged in. It is not
necessary to set up the charging schedule to
charge the vehicle.
If "Charge Until Full" is selected, and the vehicle

is plugged in after the start time of the schedule,
the vehicle will start charging when it reaches
the start time the next day. If you would like to
begin charging immediately, and continue
charging until the vehicle is fully charged, you
must select the "Charge Now" option or use the
double plug override option.
If the vehicle is plugged in outside of the set

charging schedule (and "Charge Until Full" is not
selected), the vehicle's battery will not charge.
Charging will only begin immediately if the
vehicle is plugged in within the time and day of
the week set in the schedule or the schedule is
bypassed. Otherwise, charging will automati-
cally begin when the selected charge time and
day of the week occurs when plugged in.
SCHEDULE BYPASS
NOTE:
If the vehicle is turned off outside of the charging
window, a radio pop-up message will be displayed.
The pop-up message asks the driver if they would
like to "Charge Now?" and provides the next
charging schedule start time and estimated time to
GETTING TO KNOW YOUR VEHICLE
charge the battery to 100%. If within one hour of
selecting "Yes", the vehicle is connected to a
powered EVSE, the vehicle will immediately begin
to charge (temporarily ignoring any set charge
schedule). To fully deactivate the charge schedule,
select the "Enable Schedule" checkbox until the
check mark is removed from the box.
The charging schedule can also be overridden if
the EVSE is plugged in, unplugged, and then
plugged in a second time to the vehicle. This
double plug sequence will override the set
schedule in the Hybrid Electric Pages App, and
begin charging the vehicle immediately. The
double plug sequence must be completed within
10 seconds for it to override the programmed
schedule.
e-Save
The fourth screen within the Hybrid Electric Pages
App is the e-Save screen. From this screen, you can
specify the behavior of the e-Save drive mode:
Battery Save - Maintains the high voltage State

of Charge at its current level.
Battery Charge - Uses additional power from the

gas engine to increase the high voltage State of
Charge, up to 95% capacity.
NOTE:
For information on jump starting your vehicle, refer
to the "In Case Of Emergency" chapter in the
Owner's Manual.
25
2