Table of Contents
Advertisement
(Windows XP)
1. Click on the Windows START button on the lower left corner of the screen.
2. Click on "Control Panel"
3. Double click on "SYSTEM"
4. Under System Properties select the Advanced Tab
5. In the "PERFORMANCE" section select "SETTINGS"
6. Under "SETTINGS" select "Adjust for best performance"
7. For laptop - configure power management settings for optimum performance re-
gardless of power source (AC or battery).
When the sonar is actively scanning, you may not touch the PC for quite some time. To
prevent the Screen Saver from activating, or the PC going into "Sleep Mode", set the
Poer Management settings as shown below
TO DISABLE SCREEN SAVERS AND CONFIGURE POWER MANAGEMENT SETTINGS
DO THE FOLLOWING:
8. Click on the Windows START button on the lower left corner of the screen.
9. Click on "Control Panel"
10. Double click on "DISPLAY"
11. Click the "SCREEN SAVER" tab
12. Choose "None" from the list of availabel Screen Savers
13. Click on the "POWER" button
14. Set "Turn off Monitor", "Turn off Hard Disks", etc to NEVER
41
Advertisement
Table of Contents
