Table of Contents
Advertisement
OPERATOR SWITCHES AND CONTROLS (continued)
TOP TOOLBAR (continued)
View:
• Standard Toolbar - Displays icons for various tools at the
bottom of the screen directly above the Controls toolbar (range,
boat speed, colors, etc).
• Control Toolbar - Shows operator adjustable controls at
the bottom of the screen (range, boat speed, colors, etc).
When the Controls toolbar is selected a menu comes up that
allows the operator to select which control buttons are
shown.
• Show Left and Right Sonar Windows - When this com-
mand is selected both right and left channels of the sonar
image are displayed on the monitor.
• Show Only Left Sonar Window - When this command is selected only the left channel of the
sonar image is displayed on the monitor.
• Show Only Right Sonar Window - When this command is selected only the right channel of
the sonar image is displayed on the monitor.
• Sonar Coverage Map - Shows the optional sonar coverage mapping window.
• Analog Signal Display - An analog graphic above the Controls toolbar shows the amplitude
and intensity of the signal being returned to the towfish. This display should be observed while
adjusting the TVG amplifiers (signal should be flat along its length).
• Range Ruler - Puts range marks on the monitor which allow the operator to easily determine
the distance between any target and the towfish (i.e. the boat).
• View All Annotations - Opens a dialog that shows all text annotations in the current file.
Actions:
The commands shown under the ACTION pulldown menu duplicate many of the commands shown
on the Standard Toolbar.
• Record - Selecting this command operates the sonar and saves the data to a file.
• Monitor Mode - This command is for real time viewing of sonar
images without recording data.
• Playback - Used to playback a previously recorded file.
• Continuous Playback Loop - Continuously repeats the playback
of a recorded file.
• Rewind - Rewind a recorded file.
• Fast Forward - Speeds up the playback of a recorded file.
• Pause - Freezes the motion of the sonar image on the screen
(only used when playing back recorded files.
• Stop - Stops the recording or play back of a file.
• Clear Screen - Clears sonar image from screen.
• Refresh Screen - renews the image shown on the monitor.
• Track Bottom - opens the bottom tracking setup window.
• Create New Annotation - opens the create annotation dialog.
• Jump to Ping... - used to skip directly to a specific ping number
during playback.
28
Advertisement
Table of Contents
