Related Manuals for BonsenKitchen VS3004
Summary of Contents for BonsenKitchen VS3004
- Page 1 Vacuum Sealer Operation Instructions Model: VS3004 Customer Service: support@bonsenkitchen.com 1-888-965-8032...
-
Page 2: Safety And Precautions
SAFETY AND PRECAUTIONS SAFETY INSTRUCTION Please read the instructions carefully before using this product and observe the following precautions when using the product. PRECAUTIONS This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. - Page 3 It is not recommended to use non-designed bags or accessories, and it is recommended to use the appliance for only its intended use. Do not touch the sealing strip on the top cover of the vacuum sealer to prevent burns. No part of the vacuum sealer, including the power cord or plug, should be immersed in the water.
-
Page 4: Limitation Of Responsibility
LIMITATION OF RESPONSIBILITY All technical information, data and instructions contained in this manual regarding installation, connection and operation are consistent with the latest information we obtained at the time of printing and take into account our previous experience and technology. The manufacturer is not responsible for damage caused by failure to follow the instructions in this manual, improper use, unqualified repairs, unauthorized modifications or use of unauthorized replacement parts. -
Page 5: Indicator Light
OPERATING INSTRUCTION “Dry” is for the vacuuming and sealing of dry food. When the button is pressed in standby, the machine performs vacuuming, and then seals automatically. Moist Moist “Moist” is for the vacuuming and sealing of moist food. When the button is pressed in standby, the machine performs vacuuming, and then seals automatically. - Page 6 OPERATING INSTRUCTIONS VACUUM STRUCTURE Air-sealing cotton After the upper cover is fastened to the base, the upper and lower air sealing cottons will fit together, and that will form a vacuum cavity, If you need to remove the air sealing cottons for installation and cleaning, be careful not to twist or damage.
- Page 7 POWER CABLE STORAGE SLOT Power cable storage slot When the machine is not in use, please wind the power cord around the storage slot on the back of the machine. Do not wrap the power cord around the machine. OPERATING STEPS ELECTRONIC SCALE Power button “...
-
Page 8: Operating Steps
Sampling button “ ” Prepare the number of samples (25, 50, 75 or 100pcs), place the samples on the weighing platform, press and hold the “PCS” button until the display shows “25”, press the “M” button to switch to above corresponding number (25 , 50, 75 or 100), press the “PCS”... - Page 9 2. After the indicator light is off, press the two sides to unlock the cover and open it, and take out the vacuum bag that completes the vacuum packaging. Remove excess liquid or residue from the vacuum chamber and close it without locking GUIDELINES FOR SEALING Do not put too many items in the bag so that the opening of the bag can be...
-
Page 10: Maintenance
MAINTENANCE Before cleaning the machine, make sure the machine is powered off. No part of the machine can be immersed in liquid for cleaning. Do not scrub the body with a brush to avoid scratching the surface of the body. Do not allow sharp objects to touch the outer case to avoid the appearance of scratched surfaces. - Page 11 The sealing line is hot In the case of excessively continuous use, the heating wire is overheated, please stop for 20 seconds, and then use the heating element after cooling. The sealing sponge ring is loose or damaged If it is a upper rubber ring, remove it and clean it, then re-install it. If it is a lower rubber ring, please wipe it again and then operate it again.
-
Page 12: Product Parameters
PRODUCT PARAMETERS 120VAC 60Hz 130W <55s >50kpa 11.81 inches 248℉ ≥4.5 L/min 0.078-0.118inches 15.75x6.14x2.99 inches 2.82LBS Danger: Never attempt to use your appliance, if it shows signs of damage or the power cord or plug is damaged. If the power cord is defective it is important to have it replaced with the after sales service to eliminate any danger. - Page 13 Important! We recommend that you keep the packaging of your device at least for the duration of the warranty. The guarantee does not apply without the original packaging. Warranty: Your device has two years warranty. The warranty does not cover wear and breakage following a wrong use of the product.The customer is responsible for all returns.
- Page 14 Register your product at www.bonsenkitchen.com to get more perks! Follow us @bonsenkitchen Bonsen Electronics Inc. : 5805C Peachtree Corners East Norcross, GA, 30092 : 1-888-965-8032 : support@bonsenkitchen.com...
Need help?
Do you have a question about the VS3004 and is the answer not in the manual?
Questions and answers
My vacuum sealer model vs3004 does ont vacuum.
Your BonsenKitchen vacuum sealer model VS3004 may not be vacuuming due to the following reasons:
1. Power Issues – Check if the power cord is plugged in properly and if the power socket is functioning. Ensure the power plug is in good contact with the outlet.
2. Damaged Power Cord – Inspect the power cord for any damage. If damaged, it must be replaced by the manufacturer or a qualified person.
3. Improper Use – Ensure you are using the correct mode for vacuuming (Dry or Moist) and that the machine is in standby when pressing the button.
4. Bag Positioning – Make sure the vacuum bag is correctly placed in the vacuum chamber. If not properly positioned, the machine may not be able to vacuum effectively.
5. Vacuum Chamber Cleanliness – Check if there is any food residue or liquid in the vacuum chamber that may be affecting suction. Clean and dry the chamber before use.
If these steps do not resolve the issue, further inspection or contacting customer service may be necessary.
This answer is automatically generated