Aeropro MCN100 Operating Instructions Manual

OPERATING INSTRUCTIONS FOR FASTENER DRIVING TOOLS OPERATED BY
COMPRESSED AIR
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards
may arise in connection with the tool's construction and design:

Damage to lungs if an effective dust mask is not worn.

Damage to hearing if effective hearing protection is not worn.

Wear eye protection.

Health defects resulting from vibration emission if the power tool is being used over longer period of time or not
adequately managed and properly maintained.
Content
1 Technical data
1.1 Fastener
1.2 Accessories
1.3 Description/Features
1.4 Location of Parts
2 Special references
2.1 Regulations
2.2 Noise emission
2.3 information on mechanical impact (vibration)
2.4 Safety of fastener driving tool
2.5 Safety at work
2.6 Triggering devices
Air Nailer MCN100
1
IMPORTANT:
Read all safety rules and operating Instructions
carefully before first use it. Keep this Manual for
future reference.
4 Preparing the tool for use
4.1 Preparing a tool for first operation
4.2 Connection to the Compressed air system
4.3 Filling the magazine
4.4 Handling the tool
5. Maintenance
8 Spare parts list
Air Nailer -Coil Pallet Nailer
Model No.:MCN100
2.7 Actuating systems
3 Compressed air system
6 Troubleshooting
7 explode drawing
www.aeroprotools.com
2015