1. Manuals
  2. Brands
  3. Aeropro Manuals
  4. Power Tool
  5. CN45RA
  6. Operating instructions manual

Aeropro CN45RA Operating Instructions Manual

Air-powered coil roofing nailer
Hide thumbs

Advertisement

Table of Contents

OPERATING INSTRUCTIONS FOR FASTENER DRIVING TOOLS OPERATED BY
COMPRESSED AIR
AIR-POWERED COIL ROOFING NAILER
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The
following hazards may arise in connection with the tool's construction and design:
Damage to lungs if an effective dust mask is not worn.
Damage to hearing if effective hearing protection is not worn.
Health defects resulting from vibration emission if the power
tool is being used over longer period of time or not adequately managed and properly maintained.
Wear eye protection.
TABLE OF CONTENTS:QUICK START GUIDE
 TECHNICAL SPECIFIACTIONS
 SAFETY GUIDELINES
 KEY PARTS DIAGRAM
 IMPORTANT INFORMATION
 TYPES OF FASTENERS
 OPERATING INSTRUCTIONS
 MAINTENANCE
 TROUBLESHOOTING
 EXPLODED VIEW
 PARTS LIST
1
COIL ROOFING NAILER CN45RA
Model No.: CN45RA
IMPORTANT:
Read all safety rules and operating Instructions carefully before first use it.
Keep this Manual for future reference.
2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CN45RA and is the answer not in the manual?

Questions and answers

Related Manuals for Aeropro CN45RA

Summary of Contents for Aeropro CN45RA

  • Page 1 TABLE OF CONTENTS:QUICK START GUIDE  TECHNICAL SPECIFIACTIONS  SAFETY GUIDELINES  KEY PARTS DIAGRAM  IMPORTANT INFORMATION  TYPES OF FASTENERS  OPERATING INSTRUCTIONS  MAINTENANCE  TROUBLESHOOTING  EXPLODED VIEW  PARTS LIST 2019 COIL ROOFING NAILER CN45RA...

  • Page 2: Technical Specifications

    Keep air hose away from heat, oil, and sharp edges. Check air hose for wear before each use and ensure that all connections are proper. Always ensure that the workpiece is firmly secured leaving both hands free to control the COIL ROOFING NAILER CN45RA...
  • Page 3 Always replace a damaged gauge before operating the unit again. CAUTION! Potential hazard that may result in moderate injury or damage to equipment. Always ensure that the tool has stopped before connecting to the air supply. COIL ROOFING NAILER CN45RA...
  • Page 4 NOTE: Recycle unwanted materials father than disposing of them as waste. Sort the tools, hoses, and package into specific categories and take to the local recycling centre or dispose of them in an environmentally safe way. COIL ROOFING NAILER CN45RA...
  • Page 5 When you are completely satisfied with the condition of the shipment, you should inventory the equipment. -After you open the box, you should find the following. Model CN45RA Inventory (Figure 1) Hex Wrench 3mm...

  • Page 6: General Use

    General use  The AEROPRO 15°Wire Collated Coil Roofing Nailer CN45RA drives 7/8"to 1-3/4"15° Wire Collated Coil Roofing Nails.The tool is lightweight and durable,stands up to the elements and provides consistently accurate results over the life of the tool.An ideal tool for a variety of construction projects,including installation of asphalt roofing shingles and insulation boards.It also features a high-capacity side-load magazine,tool-less depth...
  • Page 7 • Pull the nails to the right.After checking and making sure that the magazine cover is closed,hook your fingers on the nail guide and knob,turn the nail guide clockwise while pressing the knob downward,and then close the nail guide completely. • Lock the knob completely (Fig.D). COIL ROOFING NAILER CN45RA...
  • Page 8  Operation The AEROPRO Air-powered Coiled Roofing Nailer CN45RA is equipped with a push lever at the nailing point and will not operate unless the push lever is depressed (pushed upwards). Bump fire(multiple shots) • Pull the trigger with the nailer off the workpiece.

  • Page 9: Maintenance

    Keep magazine and nose of tool clean and free of any dirt lint or abrasive particles. When temperatures are below freezing, tools should be kept warm by any convenient, safe method. COIL ROOFING NAILER CN45RA...

  • Page 10: Troubleshooting

    5.Cylinder cover seal leaking. 1.Incorrect or damaged fasteners. 1.Change and use correct fastener. 2.Damaged or worn driver guide. 2.Check and replace the driver. Tool jams. 3.Magazine or nose screw loose. 3.Tighten the magazine. 4.Magazine is dirty. 4.Clean the magazine. COIL ROOFING NAILER CN45RA...

  • Page 11: Explode Drawing

     Explode Drawing  Explode Drawing Issue date:2019.5.7 Version:C/0 COIL ROOFING NAILER CN45RA...

  • Page 12: Spare Parts List

    Movable Plate Pin Sleeve Hex Wrench M4 Safety Frame Assembly Movable Plate Pin Safety Goggles Note: if you need spare parts of this model, pls feel free to contact us or the distributor where you bought this tool. Tks! COIL ROOFING NAILER CN45RA...

Table of Contents