Marantz SR5011 Service Manual page 157

Error USB Update Error
Details of Error code
Code Display
Failed to obtain the entire
23 Firmware information after
Error**23
SBL Mode.
Time Out while obtaining the
24 entire Firmware information
Error**24
after SBL Mode.
25 Failed to transit to SBL Mode
Error**25
Time Out in Download (writ-
26 ing to SDRAM) for Firmware
Error**26
Download.
Failed to write to EEPROM
27
Error**27
after SBL Mode.
36 Unable to detect USB.
Error**36
37 No Firmware File in USB.
Error**37
The Firmware File in the USB
38 does not support your model
Error**38
and area.
39 Time Out in USB Check.
Error**39
Unable to detect USB for
3A
Error**3A
Firmware Download.
No Firmware File for Firmware
3B
Error**3B
Download.
Error notification received
3C while requesting the Firm-
Error**3C
ware Info.
Time Out while obtaining
3D
Error**3D
Firmware information.
3F Failed to transit to SBL Mode.
Error**3F
Remedies
Try a new USB device, Unplug and
reconnect the AC plug, and try again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Reinsert or try a new USB device, Un-
plug and reconnect the AC plug, and
try again.
Check the file, Unplug and reconnect
the AC plug, and try again.
Make sure the model name and area of
the Firmware File, Unplug and recon-
nect the AC plug, and try again.
Unplug and reconnect the AC plug, and
try again.
Reinsert or try a new USB device, Un-
plug and reconnect the AC plug, and
try again.
Check the file, Unplug and reconnect
the AC plug, and try again.
Try a new USB device, Unplug and
reconnect the AC plug, and try again.
Try a new USB device, Unplug and
reconnect the AC plug, and try again.
Unplug and reconnect the AC plug, and
try again.
157
Error USB Update Error
Details of Error code
Code Display
50 Unable to detect USB.
Error**50
51 No Firmware File in USB.
Error**51
The Firmware File in the USB
52 does not support your model
Error**52
and area.
Error notification received
54 while requesting the Firm-
Error**54
ware Info.
Time Out while obtaining
55
Error**55
Firmware information.
Unable to detect USB for
56
Error**56
Firmware Download.
No Firmware File for Firmware
57
Error**57
Download.
Invalid Device ID in response
5A or no response from Sub for
Error**5A
the "C" command.
NACK received in response or
5B no response from Sub for the
Error**5B
"L" command.
No Update Packet received
5C
Error**5C
from CY920 (Time Out).
Abnormal data in Update
5D Packet received from CY920
Error**5D
(CRC Error).
Abnormal data in Update
5E Packet received from CY920
Error**5E
(Packet No Error).
Setup failure of the XModem
5F
Error**5F
transfer method.
Remedies
Reinsert or try a new USB device, Un-
plug and reconnect the AC plug, and
try again.
Check the file, Unplug and reconnect
the AC plug, and try again.
Make sure the model name and area of
the Firmware File, Unplug and recon-
nect the AC plug, and try again.
Try a new USB device, Unplug and
reconnect the AC plug, and try again.
Unplug and reconnect the AC plug, and
try again.
Reinsert or try a new USB device, Un-
plug and reconnect the AC plug, and
try again.
Check the file, Unplug and reconnect
the AC plug, and try again.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.