Denon Home 350 Service Manual page 55

LED STATUS
1. Updating
The following transition occurs during an update. The same occurs in network and USB updates.
The network connection is FIRMWARE UPDATE PROCE-
complete DURE
Blue : Solid Amber : Blinking
Amber blinking = About 250ms On/Off
2. Updating (Service region settings)
The following transition occurs during a Service Region Settings update.
Connect USB Change region
Blue : Solid Green : Blinking
X=The indicator blinks the same number of times as the region number being set. (North America=1, Europe=2, Japan=3, Australia=4,
3. Updating (Service Release Type)
The following transition occurs during a service release type update.
Connect USB Change release type
Blue : Solid Green : Blinking
4. On startup of HEOS (when power is turned on)
The following transition occurs on startup.
Power off Starting
Led : Off Blue : Blinking
Setting complete
Rebooting Network connection com-
plete
Blue : Slow Blinking Blue : Solid
Change complete END
Blue : Blinking(X times) Blue : Solid(7sec.)
Korea=5)
Change complete END
Blue : Blinking (3 time) Blue : Solid (7sec.)
Setting complete
Connected to network
Blue : Solid
Setup not completed
Refer to "QSG".
Set up the network connec-
tion
Amber : Solid
5. Factory Reset
Press and hold the "Bluetooth" button before inserting the power plug, then insert the power plug
while holding down the button and wait for more than 5 seconds.
Network connected Resetting to factory default
Blue : Solid Amber : Blinking
Amber Blinking = About 750ms On/Off : About 130sec
6. Software Reset (Clear user settings)
Press and hold the "Bluetooth" and "Connect" buttons for 5 seconds or more while connected to the
network.
Network connected Soft reset start
Blue : Solid Amber : Fast Blinking
Amber Blinking = About 250ms On/Off : About 25sec
7. Critical Error
The following transition occurs on startup.
Power off Starting
Led : Off Blue : Slow Blinking
Slow Blinking : 750ms On/Off, Fast Blinking : 250ms On/Off
55
Starting Not set up
Amber : Solid
(Blinking -> lit)
Blue : Blinking
*Blue indicator blinks mo-
mentary during the process
Starting Not set up
Amber : Solid
Blue : Blinking
(Blinking -> lit)
Critical Error
Firmware Error
Red : Slow Blinking
Critical Error
Hardware Error
Red : Fast Blinking