Advertisement
AVR11 engelsk manual
11/01/98 10:46
This unit is designed for trouble-free operation. Most problems users encounter are due to operating errors. So, if you have a problem,
first check this list for a possible solution. If the problem persists, consult your authorized Harman Kardon Service Center.
If the problem is...
No lights illuminate when POWER button is pressed
No sound is heard
Dolby Surround does not work on center and rear channels
Selecting video component produces sound but no picture
The TV picture does not match the sound
No output from one or more channels
No center channel output
Tuner sound has a large amount of interference, or
The "Stereo" display is not illuminated, or
Tuner sound distorts and/or is noisy
Tuner is intermittent or continuously buzzing or hissing
Stations cannot be preset
Side 14
Troubleshooting
14
Make sure that the...
Unit is plugged into a live outlet
Correct input function selector button has been pressed
Volume is turned up
Speakers are connected properly
Correct surround mode is selected
Rear and Center levels are turned up
Dolby Surround material is used as source
Video cables are connected properly
Video sources are properly connected to receiver
Video/Antenna Switch on TV is set to Video
Cables are not defective: Check/replace speaker cables
The signal source is operating and providing proper signal output
to the AVR11
Dolby surround or 3 stereo is turned on
Phantom mode is not active
The antenna is properly connected
The antenna is properly located
The antenna is set in the proper direction
The antenna is adequate to receive the desired station
The unit is away from fluorescent lights, TVs, motors and other
electrical appliances
After pressing the Memory button, the Preset button is pressed while
the memory indicator blinks
Advertisement
