Presetting The Radio Stations; Listening To The Radio - LG LX-M240 Owner's Manual

Hide thumbs Also See for LX-M240:
Table of Contents

Advertisement

Presetting the
Radio
Presetting the
Radio
You can preset 30 stations for FM and AM.
Before tuning, make sure that you have turned
down the volume to the minimum.
1.
Press TUNER/BAND to select the frequency
(AM or FM) you want.
Every time you press this button, AM and FM
changes alternately.
2.
Select a station you want by pressing
TUNING (-)/(+) buttons.
Tuning in automatically
- Press TUNING (-)/(+) for more than 0.5
second. Scanning stops when the unit
tunes in a stations.
Tuning in manually
- Press TUNING (-)/(+) briefly and repeatedly.
3.
Press PROGRAM/MEMO on the remote
control.
A preset number will flash in the display window.
4.
Press PRESET (-)/(+) (or PRESET (
on the remote control) to select the preset
number you want.
5.
Press PROGRAM/MEMO again.
The station is stored.
6.
Repeat steps 1 (or 2) to 5 to store other
stations.
To delete all the memorized stations
Press and hold PROGRAM/MEMO on the front
panel for about two seconds, "CLEAR" appears in
the display window and then press CLEAR
again, the stations are deleted.
For your reference
If all stations have already been entered, FULL
message will appear in the display window for a
moment and then a preset number will flash. To
change the preset number, follow the steps 4-5.
To recall presets
Press and hold PRESET (-)/(+) (or PRESET
/
(
) on the remote control) until the desired
preset number appears or press it repeatedly.
Stations

Listening to the Radio

Stations
Listening to the Radio
1.
Press TUNER/BAND to select the frequency
(AM or FM) you want.
Every time you press this button, AM and FM
changes alternately.
The last received station is tuned in.
2.
Press PRESET (-)/(+) (or PRESET (
on the remote control) repeatedly to select
the preset station you want.
- Each time you press the button, the unit
3.
Adjust the volume by rotating VOLUME
CONTROL KNOB (or pressing VOLUME
(
To listen to non-preset radio stations
• Use manual or automatic tuning in step 2 on
left.
• For automatic tuning, press and hold TUNING
(-)/(+) on the front panel.
To turn off the radio
/
)
Press POWER (
unit off or select another function mode (MP3/CD
or TAPE).
For your reference
• If an FM program is noisy
Press MODE/RIF so that "STEREO" disap-
pears in the display window. There will be no
stereo effect, but the reception will improve.
Press MODE/RIF again to restore the stereo
effect.
• To improve reception
Reposition the supplied antennas.
otes
• Use MODE/RIF (Radio Interference Filter)
function to switch to mono reception if stereo
reception is distorted by noise.
• When recording the MW(AM) or LW broad-
cast, beat noises may occur. If it does, press
MODE/RIF once.
tunes in one preset station at a time.
/
) on the remote control) repeatedly.
STANDBY/ON) to turn the
/
)
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents