Tape Playback; Basic Playback; To Stop Play; Tape Counter Reset - LG LX-M240 Owner's Manual

T ape Pla ybac k
T ape Pla ybac k
Note: Use only normal tapes.

Basic Playback

1.
Press TAPE to select tape function.
("NO TAPE" appears in the display window.)
2.
Open the cassette door by pushing
PUSH EJECT position.
3.
Insert a cassette with the tape side to the
bottom and then close deck.
4.
Press PLAY ( or

To Stop Play

Press STOP( ) during playback.

Tape Counter Reset

Press COUNTER RESET (COUNTER) during
playback. Playing time appears "TP - 0000" in
display window.

To Play Rewind or Fast Forward

After pressing
panel or on the remote control during
/
playback, or stop, press PLAY(
you want.
AUTO STOP DECK
- After auto stop deck plays only front side, the
unit stops automatically.
AUTO REVERSE DECK:OPTIONAL
-
You can select direction of the cassette you
want by pressing PLAY MODE.
Pressing Display
After the cassette plays
front or reverse (back-
Once
ward play) side, stops
automatically.
After the cassette plays
front and reverse side,
Twice
stops automatically.
After the cassette plays
Three
six times repeatedly
times
front and reverse side,
stops automatically.
14
: OPTIONAL).
/ on the front
) at the point
Function
T ape Recor ding
T ape Recor ding
Wind the tape to the point recording starts.
Note: Use only normal tapes.

Basic Recording

1.
Select the function (MP3/CD, TUNER/BAND
or AUX) you want to record.
2.
Open the cassette deck and insert a blank
cassette into the cassette compartment.
To set the recording direction :OPTIONAL
Press PLAY MODE repeatedly to set the
recording direction.

Recording from Radio,CD or Auxiliary

source

1.
Press on the front panel or the remote
control and then select the MP3/CD, TUNER
or AUX
function.
- "REC" flashes and holds the cassette in
pause mode.
2.
Press or PLAY(
or the remote control.
The recording begins.
To pause recording
Press during recording.
- "REC" flashes in display window.
To stop recording
Press TAPE STOP( ).

CD to Tape Synchronized Recording

The CD synchro recording function dubs a com-
plete CD and programmed titles automatically
into a cassette.
1.
Press CD SYNC. in stop mode.
"REC" flashes and "CD SYNC" displays in
the display window.
2.
The synchronized recording is started
automatically after about 8 seconds.
otes
• If you wish to record from the desired track,
select the desired track with CD SKIP/
SEARCH ( /
mencing CD synchro recording.
• The function change is not possible during
recording.
) on the front panel
) before com-