Tings; Changing The Basic Set- Tings; Appliance Care; Preparing The Appliance For The Appliance Care Programme - Bosch WQG245A0ES User Manual And Installation Instructions

16.2 Changing the basic set-

tings

Set the programme selector to po-
1.
sition 1.
Press ⁠ Seco and, at the same
2.
time, turn the programme selector
to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 38
To change the value, press
4.
minado en/em.
To save the changes, switch off
5.
the appliance.
17 Appliance care
17.1 Preparing the appliance
for the appliance care
programme
The appliance must be prepared be-
fore basic or intensive appliance care
is carried out.
Requirement: The fluff filter has been
cleaned.
→ "Cleaning the fluff filter", Page 31.
Remove the laundry.
1.
Close the appliance door.
2.
Pull out the condensation con-
3.
tainer, keeping it level.
⁠ Ter-
Empty the condensation container
4.
→ Page 33.
Appliance care en
39