Cisco 3750 Installation Manuallines page 9

Chapter 3 Switch Installation
Step 2
Step 3
Step 4
Figure 3-1 Connecting to the Console Port
1 Console port
78-15136-01
No parity
•
• None (flow control)
After you have gained access to the switch, you can change the console baud rate
through the Administration > Console Baud Rate window in the Cluster
Management Suite (CMS).
Using the supplied RJ-45-to-DB-9 adapter cable, insert the RJ-45 connector into
the console port, as shown in
Attach the DB-9 female DTE adapter of the RJ-45-to-DB-9 adapter cable to a PC,
or attach an appropriate adapter to the terminal.
Start the terminal-emulation program if you are using a PC or terminal.
S T A C K
1
Figure 3-1.
C O N S O
L E
S T A C K
2
1
Catalyst 3750 Switch Hardware Installation Guide
Preparing for Installation
3-9