Chapter 3
Switch Installation
Figure 3-31 Mounting the Switch on a Wall
1
1
User-supplied screws
78-15136-01
After the switch is mounted on the wall, you might need to perform these tasks to
complete the installation, run the setup program, and access the switch:
(Optional) Connect the switches in the stacks. See the
•
StackWise Cable to the StackWise Ports" section on page
•
Connect to the console port and start the emulation software. See the
"Connecting to the Console Port" section on page 1-4
Terminal Emulation Software" section on page
Catalyst 3750 Switch Hardware Installation Guide
Installing the Switch
1
"Connecting the
3-35.
and the
"Starting the
1-6.
3-33