Blackmagic Ultimatte Setup - Blackmagicdesign Ultimatte 12 Operation Manual

Blackmagic Ultimatte Setup

Blackmagic Ultimatte Setup is used to change settings and update the internal software in
your Ultimatte.
To use Ultimatte Setup:
1 Connect Ultimatte to your computer via USB or Ethernet.
2 Launch Ultimatte Setup. Your Ultimatte model will be named in the setup utility
home page.
3 Click on the circular 'setup' icon or the image of your Ultimatte to open the setup page.
Setup Page
If you have more than one Ultimatte, you may wish to give each unit a discrete name to make
them easy to identify. You can do this via the 'name' option.
Network
These settings allow you to configure options such as choosing between connecting to a
network over DHCP or using a static IP address. For more information on connecting your
Ultimatte to a network, refer to the 'connecting to a network' section.
Blackmagic Ultimatte Setup 71