5) Move the service switch on the control box to the "DRAIN" position. Then move the
control switch to the "SERVICE" position.
6) Replace the front panel in its correct position and allow the icemaker to drain for
minutes.
7) Remove the front panel and move the control switch to the "OFF" position. Unplug the
icemaker from the electrical outlet.
8) Disconnect the bin control connector. Remove the 3 thumbscrews securing the bin
cover, and remove the bin cover with the bin control attached.
9) Pour the cleaning solution into the water tank.
10) Plug the icemaker back in. Move the service switch to the "WASH" position, then move
the control switch to the "SERVICE" position to start the cleaning process. Replace the
front panel in its correct position.
11) After 30 minutes, remove the front panel and move the service switch to the "DRAIN"
position.
1) Replace the front panel in its correct position and allow the icemaker to drain for
minutes.
13) Remove the front panel and move the control switch to the "ICE" position.
14) Replace the front panel in its correct position and allow the water tank to fill with water
for 3 minutes.
15) Remove the front panel and move the service switch to the "WASH" position. Then
move the control switch to the "SERVICE" position. Replace the front panel in its
correct position.
16) After 5 minutes, remove the front panel and move the service switch to the "DRAIN"
position.
17) Replace the front panel in its correct position and allow the icemaker to drain for
minutes.
18) Repeat steps 13 through 17 three more times to rinse thoroughly
19) Remove the front panel and move the control switch to the "OFF" position. Proceed to
". Sanitizing Procedure – Icemaker".
2. Sanitizing Procedure – Icemaker
1) Dilute 1.0 fl. oz. (30 ml or tbs) of a 5.5% sodium hypochlorite solution (chlorine
bleach) with gal. (7.6 l) of warm water.
) Pour the sanitizing solution into the water tank.
3) Move the service switch to the "WASH" position, then move the control switch to the
"SERVICE" position to start the sanitizing process. Replace the front panel in its correct
position.
4) After 15 minutes, remove the front panel and move the service switch to the "DRAIN"
position.
5) Replace the front panel in its correct position and allow the icemaker to drain for
minutes.
16