Dmx Channels - Hansol Hurricane-AW Manual

4.3. DMX Channels

Hurricane AW has 19 DMX channels as follows.
CH Function
1 Angle Channel
2 Flame Channel
3 Electric spark
4 Pump
5 Stepp sequence
of single flame
shot
6 Bank 1
7 Loop of Bank 1
8 Transit time
9 Bank 2
10 Loop of Bank 2
11 Transit time
12 Bank 3
13 Loop of Bank 3
14 Transit time
15 Bank 4
16 Loop of Bank 4
17 Transit time
18 Bank 5
19 Loop of Bank 5
DMX key
0-255 Moving flame head to the angle
200-255 You can shoot flame manually or you can program
your own flame show with this flame channel
differently from single stepp sequences or autoshow.
This flame channel works only after pump and
ignition works. Without pump and ignition working,
this channel does not work.
200-255 Electric spark ignition works only after pump starts.
200-255 Turn on and off the pump(pump stops automatically
at 18bar and below 14bar, re-start to secure enough
working pressure. Initially, Pump needs 10 sec to get
working pressure 16bar then, can start the show
76-255 This single shot sequence is pre-programmed on the
device. Flame shooting time is 20ms(0.2sec)
61-255 13 autoshows are pre-programmed. Each program is
selected by DMX key value
0-255 Loop numbers of bank 1
0-255 Transit time from bank 1 to bank 2
61-255 13 auto shows are pre-programmed. Each program
is selected by DMX key value
0-255 Loop numbers of bank 2
0-255 Transit time from bank 2 to bank 3
61-255 13 auto shows are pre-programmed. Each program
is selected by DMX key value
0-255 Loop numbers of bank 3
0-255 Transit time from bank 3 to bank 4
61-255 13 auto shows are pre-programmed. Each program
is selected by DMX key value
0-255 Loop numbers of bank 4
0-255 Transit time from bank 4 to bank 5
61-255 13 auto shows are pre-programmed. Each program
is selected by DMX key value
0-255 Loop numbers of bank 5
Hurricane-AW
Definition Remark
Below 6bar, flame
channel does not work
below 6 bar.
Electric spark channel
Working pressure : 16-
18bar.
See the chart 1 for
detail
See the chart 2 for
detail of the autoshow.
See the chart 3 for
setting loop numbers
and transit time.
7