Verizon GT784WNV User Manual page 79

2.
Enter the name of the rule in the "Name" text box.
3.
Select a queue priority from the "Queue Priority" drop-down list box (High,
Medium, Low).
4.
Enter the amount of bandwidth to reserve in the "Reserve Bandwidth" text
box. The amount of bandwidth available is shown below the text box.
5.
Select the type of protocol from the "Protocol" drop-down list.
6.
Select the TOS bit value from the "TOS Bit Value" drop-down list.
7.
Enter the source IP information in the appropriate text boxes below "5.
Select Source IP Information. "
8.
Enter the destination IP information in the appropriate text boxes below "6.
Select Destination IP Information. "
9. Apply to save changes.
Click
Wireless DSL Gateway User Manual
79
© 2012 Verizon. All Rights Reserved.