Verizon GT784WNV User Manual page 11

Wireless DSL Gateway User Manual
1.4b Rear Panel
The rear panel of the Gateway contains six ports (Ethernet [4], Phone, and Power
[12VDC1A]), as well as Reset and Power switches.
Phone Port
The Phone port is used to connect the Gateway to a DSL (Digital Subcriber Line)
connection.
Ethernet Ports
The Ethernet ports are used to connect computers to the Gateway via Ethernet
cable. The Ethernet ports are 10/100 Mbps auto-sensing ports, and either a straight-
through or crossover Ethernet cable can be used when connecting to the ports.
Reset Switch
Depressing the Reset switch for one second will restore the Gateway's factory
default settings. To reset the Gateway, depress and hold the Reset switch for
approximately ten seconds. The reset process will start after releasing the
switch.
11
© 2012 Verizon. All Rights Reserved.