Foreword Light Body Thank you for purchasing! ⑬ Silent LED Video Light UL150IIBi is fanless design and noise-free. The separate light body and controller are conveniently operational. Stable light source creates high CRI ④ ② ,and wide CCT range brings great performance. It supports Bluetooth APP wireless group control and stepless brightness adjustment.
① Installation and Disassembly Guide 1. Connect the controller and the light body Press and hold the spring latch button of the connecting cable, insert the connecting ② cable into the DC INTPUT Port of the light body, then insert the other end of the connecting cable into the DC OUTPUT Port of the controller to complete the connec- ⑥...
Power Supply 3. Mount on the light stand Loosen the handle of the controller 1.AC Power Supply clamp, then insert the light stand and rotate the handle to tighten. Finally, insert the V port of the controller into AC100V-240V the clamp slot. Tip: Press and hold the mount fixing spring latch pusher can easily remove the controller.
Page 15
Controller Operation Instruction 4. Menu Setting Short press < MENU > Button to enter the menu interface, displayed in order with Wireless, Bluetooth, DMX,Dimmer, Screen Bright, Language, Reset, Version & Upgrade.Turn and 1. Turn On/Off short press the SET adjustment dial on the menu interface to select and enter the Press the controller Power Switch corresponding setting options interface.
Page 16
4.3 DMX 4.5 Screen Bright The DMX Setting interface is displayed Turn the SET adjustment dial on the with Mode and Address. Short press the screen bright setting interface to SET adjustment knob to choose between choose 1, 2, 3 levels of screen MODE:CCT 8bit mode and address,then turn it to set brightness.
Page 17
5. Light Effect Setting Short press < > button to enter FX light effect interface, turn the SET adjustment dial to choose flash, lightning, broken bulb,TV,candle, fire or firework scenes. Firework Mode Note: Short press the SET adjustment dial to change the rate (I、II、III) and adjust brightness (0%-100%) after choosing one of the above Light Effects.
100% 100% 100% 100% Declaration of Conformity AC Power Supply/48V GODOX Photo Equipment Co,Ltd. hereby declares that the This equipment are in 100% 100% 100% 100% DC Power Supply compliance with the essential requirements and other relevant provisions of EU Direc- tive 2014/53/EU.
If maintenance service is needed, you can directly contact the product distributor or maintenance service, please fill in the following form in coordination with the seller authorized service institutions. You can also contact the Godox after-sale service call and safe-keep it. Thank you! and we will offer you service.
Need help?
Do you have a question about the UL150IIBi and is the answer not in the manual?
Questions and answers