Masterbuilt CS40G1DW Instruction Sheet

Digital charcoal smoker

Hide thumbs Also See for CS40G1DW:

Table of Contents

Download this manual

Digital Charcoal Smoker CS40G1DW

• Always remove plug from outlet before servicing your smoker.

• Make sure your smoker has fully cooled to avoid burns.

• Some components may have sharp edges. Use caution to avoid injury.

INSTALLATION:

• Remove the doors and all the internal contents.

• Rotate the smoker legs up.

• Follow steps (1-9) to replace your fan tube kit.

BLACK

WHITE

Disconnect all wires from fan and controller.

Fan Tube Kit Instruction Sheet

CAUTION

YELLOW

Remove the Legs, Rear Brace and Casters.

Tools Needed:

Phillips Head Screwdriver

Manual Code: 9806200011 210618-GH

Table of Contents

Do you have a question about the CS40G1DW and is the answer not in the manual?

Page 1 Fan Tube Kit Instruction Sheet Digital Charcoal Smoker CS40G1DW CAUTION • Always remove plug from outlet before servicing your smoker. • Make sure your smoker has fully cooled to avoid burns. • Some components may have sharp edges. Use caution to avoid injury.
Page 2 7. Replace the Legs / Brace / Casters assembly (see step 2). 8. Reconnect all wires to the controller and fan (see step 1). 9. Rotate your smoker to upright position and return the internal contents. Customer Service masterbuilt.com/contact-us masterbuilt.com/warranty masterbuilt.com/collections/parts @masterbuilt...