Rf Safety Distance; Cable Connections; Power Supply Information; Restricted Environments - SonicWALL SonicWave 641 Reference Manual

Hide thumbs Also See for SonicWave 641:

Table of Contents

6. This equipment is not intended for use at workplaces with visual display units, in accordance with §2 of the

German ordinance for workplaces with visual display units. To avoid incommoding reflections at visual

display workplaces, this device must not be placed in the direct field of view.

RF Safety Distance

The antennas used for this transmitter must be installed to provide a separation distance of at least 36 cm from all

persons and must not be co-located or operating in conjunction with another antenna or transmitter.

All Ethernet and RS232 (Console) cables are designed for intra-building connection to other equipment. Do not

connect these ports directly to communication wiring or other wiring that exits the building where the appliance is

located.

When this product's power is provided by the Ethernet cable plugged in to the "LAN/POE" port, this is called

"Power over Ethernet" or "PoE". The PoE source should only be UL listed marked "Class 2" or "LPS" with an

output rated 48 VDC, minimum 0.3 A, Tma: minimum 40 ºC.

When powering with an external power adapter by way of a barrel jack, use only UL-listed power supplies marked

"Class 2" or "LPS" with an output rated at 12Vdc, minimum. 3.0A, Tma: minimum 40 degrees C. The external

power adapter is not provided with this product but can be purchased from SonicWall. Reliable grounding of

external power adapter purchased from SonicWall must be maintained. Particular attention must be given to

power supply connections other than direct connections to the branch circuits, such as power strips.

The SonicWall 641 wireless device, like other radio devices, emits radio frequency electromagnetic energy. The

SonicWall wireless device operates within the guidelines found in radio frequency safety and recommendations.

These standards and recommendations reflect the consensus of the scientific community and result from

deliberations of panels and committees of scientists who continually review and interpret the extensive research

literature. In some situations or environments, the use of the SonicWall wireless device could be restricted by the

proprietor of the building or responsible representatives of the applicable organization.

Examples of such situations include the following:

Using the SonicWall wireless device equipment on board airplanes, or

Using the SonicWall wireless device equipment in any other environment where the risk of interference

with other devices or services is perceived or identified as being harmful.

SonicWave 641 Safety and Regulatory Reference Guide

SonicWall® SonicWave 641 Safety and Regulatory Information Guide

Table of Contents