Hidden Cam - Room essentials 430238 Assembly Instructions Manual

step 12.
1F
M67
Hidden part using
recycled material.
Color may vary.
(1F) x 4 (2F) x 4 (30S) x 20

hidden cam

cam dowel black 1-9/16" fl at head screw
Push one HIDDEN CAM (1F) into a DRAWER BRACE (M67). Then, insert the metal end of a CAM DOWEL (2F) into the HIDDEN CAM.
Fasten the DRAWER BRACE (M67) to the UPPER DRAWER FRONT (H). Tighten one HIDDEN CAM.
Fasten a DRAWER BACK (D182) to the DRAWER SIDES (D44 and D45) and DRAWER BRACE (M67). Use fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).
NOTE: You should start each SCREW a few turns before completely tightening any of them.
Repeat Steps 11-12 for the lower drawers. The angled edge of the lower drawer front will be opposite from the upper drawer front.
17
Arrow
Metal end
2F
Surface with
HIDDEN CAM
M67
H
Be sure the DRAWER
BOTTOM inserts into the
DRAWER BACK groove.
D44
D182
M67
H
D45
430238