Drawer Bottom - Room essentials 430238 Assembly Instructions Manual

step 11.
VIEW THE T-SLOT BOX VIDEO
Angled edge
(8G) x 4 (1S) x 16
drawer front bracket black 9/16" large head screw
Pull the DRAWER FRONT BRACKETS (8G) apart and slide them into the grooves in the DRAWER SIDES (D44 and D45). You may need to gently tap them in
with a hammer.
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and "LH" for easy identifi cation.
Fasten the DRAWER FRONT BRACKETS (8G) to the UPPER DRAWER FRONT (H). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
Slide a DRAWER BOTTOM (D988) into the grooves in the DRAWER SIDES (D44 and D45) and UPPER DRAWER FRONT (H).
16
H
Groove
The drawer side with label
must be fastened to the
UPPER DRAWER FRONT (H).
D44
Push down
8G
D45
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
With the palm of
your hand, tap the

DRAWER BOTTOM

down into the groove.
U n
fi n i
s h e
d s
u r f
a c e
D988
D44
H
D45
430238