Panasonic Omnivision PV-C2061 Operating Instructions Manual page 23

FM Transmitter
<For Model PV-C2081 only>
Send Wireless
Within 13 feet
P OW E R POWER VO L VOL C H CH STOP/EJECT STOP/EJECT REW/ REW/ PLAY/REPEAT PLAY/REPEAT FF/ FF/ REC REC TIMER/FM TIMER/FM
E REC R C ON TIMER O N T I M E R P R O G PROG TIMER T I M E R
VIDEO IN VIDEO IN L-AUDIO L-AUDIO IN-R IN-R
A C T I O N ACTION
Carrier Frequency : 93 ~ 97, 99 ~ 103 MHz
FM Transmitter is ...
This unit's sound can be heard on an FM Radio.
First, tune your radio to a vacant (no broadcast)
station between 93 ~ 97 or 99 ~ 103 MHz.
Then, set the combo to the same station. Now,
fine-tune this unit so the sound comes in clearly.
FM Transmitter Carrier Frequency Setup
1
Press ACTION
to display MAIN MENU.
2
M A I N MENU
T V VCR LANGUAGE
EX I T
C H CLOCK
SELECT :
SET : ACT I ON
3
SET UP TV
LOCK
CAPT I ON
I NPUT SELECT : TUNER
V I DEO ADJUST
SET UP FM SET UP FM
SPEAKER : ON
SELECT :
SET :
END : ACT I ON
4
SET UP FM
FM ANTENNA : INT
FM TRANSMITTER : OFF
SET UP FM TRANSMITTER
SET UP FM TRANSMITTER
SELECT :
SET :
END : ACT I ON
• When step 4 is done, if FM TRANSMITTER is
"OFF, " the unit is automatically set to "MONO."
5
SET UP FM TRANSMITTER
93MHz - 97MHz
99MHz 103MHz
99MHz - 103MHz
99MHz 103MHz
To Make Corrections,
select frequency with CH
6
Press ACTION four times
to end setup
Audio equipment
with FM Radio
1) Press to
select "TV. "
2) Press ACTION to
display SET UP TV
screen.
1) Press to select
SET UP FM.
2) Press to display
screen.
1) Press to select
SET UP FM
TRANSMITTER.
2) Press to display
screen.
1) Press to select
the desired frequency
range. (93-97 or 99-
103 MHz)
2) Press to select
the Carrier Frequency.
3) Press ACTION to set
the Carrier Frequency.
(The screen in step 4
is redisplayed.)
, then repeat step 5.
* Important: if a remote control button does not work
when pressed, press the COMBO button
on the remote and try the button again.
FM Transmitter Control
Set to "STEREO" if you wish to listen in stereo.
1
Do "FM Transmitter Carrier
Frequency Setup" steps 1~3 at left.
2
SET UP FM
FM ANTENNA : INT
FM TRANSMITTER : MONO
FM TRANSMITTER : MONO
SET UP FM TRANSMITTER
SELECT :
SET :
END : ACT I ON
• If the sound becomes noisy, change the unit
setting from STEREO to MONO or the FM Radio
from stereo to monaural.
3
Press ACTION three times
to end setup
Notes
• The Carrier Frequency shown by the selector bar is a
guide only. Please listen to the sound and adjust
accordingly.
• The unit will transmit sound when unit power is on and
"FM TRANSMITTER : MONO or STEREO" is selected.
• When unit power is turned off, "FM TRANSMITTER"
returns to "OFF" setting.
• Please place your FM Radio within 13 feet of the unit.
• Interference occurs when you select CATV channels 95,
96, or 97, while FM Transmitter is operating.
• FM Transmitter will not work in FM Radio Mode.
• Depending on the positioning or type of FM Receiver, the
sound signal may become noisy. In this case, change the
FM Receiver from Stereo to Monaural.
• Please note the current FM Transmitter capability is the
maximum level allowed by FCC standard for low power
license-exempt radio communication devices.
1) Press to select
FM TRANSMITTER.
2) Press to select
"OFF", "MONO",
or "STEREO."
23