Operational Characteristics; Initialization; Navigation - Holux GR-213 User Manual

Cold start
4) Position accuracy:
A) Non DGPS (Differential GPS)
Position
Velocity
Time
B) DGPS (Differential GPS)
Position
Velocity
C)EGNOS/WAAS/Beacon
Position
5) Dynamic Conditions:
Altitude
Velocity
Acceleration
Jerk
1.3.5 Interfaces
1) Dual channel RS-232 or TTL compatible level, with user selectable baud rate (4800-Default, 9600, 19200,
38400).
2) NMEA 0183 Version 2.2 ASCII output (GGA, GSA, GSV, RMC, option GLL, VTG, ZDA).
3) Real-time Differential Correction input (RTCM SC-104 message types 1,2 and 9).
4) SiRF binary protocol.

2. Operational characteristics

2.1 Initialization

As soon as the initial self-test is complete, the GR-213 begins the process of satellite acquisition and
tracking automatically. Under normal circumstances, it takes approximately 42 seconds to achieve a position fix,
38 seconds if ephemeris data is known. After a position fix has been calculated, information about valid position,
velocity and time is transmitted over the output channel.
The GR-213 utilizes initial data, such as last stored position, date, time and satellite orbital data, to achieve
maximum acquisition performance. If significant inaccuracy exists in the initial data, or the orbital data is
obsolete, it may take more time to achieve a navigation solution. The GR-213 Auto-locate feature is capable of
automatically determining a navigation solution without intervention from the host system. However, acquisition
performance can be improved as the host system initializes the GR-213 in the following situation:
1) Moving further than 500 kilometers.
2) Failure of data storage due to the inactive internal memory battery.

2.2 Navigation

After the acquisition process is complete, the GR-213 sends valid navigation information over output
channels. These data include:
1) Latitude/longitude/altitude
2) Velocity
3) Date/time
4) Error estimates
5) Satellite and receiver status
The GR-213 sets the default of auto-searching for real-time differential corrections in RTCM SC-104
standard format, with the message types 1, 5, or 9. It accomplishes the satellite data to generate a differential
(DGPS) solution. The host system, at its option, may also command the GR-213 to output a position whenever
a differential solution is available.
42 sec., averaged
5-25 meter CEP without SA
0.1 meters/second, without SA
1 microsecond synchronized GPS time
1 to 5 meter, typical
0.05 meters/second, typical
< 2.2 meters, horizontal 95% of time
< 5 meters, vertical 95% of time
18,000 meters (60,000 feet) max
515 meters / second (700 knots) max
4 G, max
20 meters/second, max
HOLUX
4