Table of Contents
Advertisement
AERO.100 User Guide
• Connect AERO.100 AES outputs AES Outputs 1/2 and 3/4 to the external watermark
encoder inputs 1 and 2.
• Connect external watermark encoder outputs 1 and 2 to AERO.100 AES inputs 1/2 and
3/4.
The typical viewer ratings encoder does not encode to the Ls or Rs channels so pairs 5/6 do not
need to be routed outside the AERO.100. Processed channels 1/2 and 3/4 are routed through
the external encoder and directly to the Dolby encoder inputs through the Dolby Inserts.
Return A and B are the patch points to the Dolby Insert.
Note!
Audio delays may require adjustment depending on the external encoder
latency.
6.5 Dolby Encoding of Instance
6.5
6.5
6.5
Dolby Encoding of Instance
Dolby Encoding of Instance
Dolby Encoding of Instance 1 SAP using Instance 2 Dolby
Encoder
Encoder
Encoder
Encoder
There are some users that may want to insert a SAP program created in Instance 1 into the
stereo Dolby encoder in a stereo Instance 2. This is often the case when the user wants to
configure a SAP output that has auto replacement of missing SAP by a downmix of the main
channel. In the case of SAP configured on Instance 1, DRC Program 2 Follow the steps below.
1.
Output Routing > AES/SDI routing > AES
2. Select AES Out 1/2 and select Proc 7/8 from the drop down as the source. Processed
SAP is now on AES output 1/2.
3.
Instance 2 > Output > Dolby Digital Plus Encoder >
4.
Instance 2 > Input > Source > Return
5. Connect a physical unbalanced AES jumper between AERO.100 AES 1/2 Out and AES 1/2
In.
6.6
6.6 Auto Replace of
Auto Replace of Stereo Program
6.6
6.6
Auto Replace of
Auto Replace of
There is a feature of the 5.1 surround output channel. The most commonly used source pair
configuration for embedded SDI content is to place stereo programs on pair 1 (channels 1/2).
©2016 TLS Corp. ALL RIGHTS RESERVED
1 SAP using Instance 2 Dolby
1 SAP using Instance 2 Dolby
1 SAP using Instance 2 Dolby
Outputs.
A and select AES 1/2 as the source.
Stereo Program by 5.1 Surround Program
Stereo Program
Stereo Program
Oct 2016
Insert and select On.
by 5.1 Surround Program
by 5.1 Surround Program
by 5.1 Surround Program
Page 81
Advertisement
Table of Contents
