Intake Fan Assembly - Toshiba TLPB2U Service Manual

3-6. Intake Fan
Step
1
2
3
4
Figure
Remove the screw that mounts the fan to the cabinet
(M2.6 x 6).
Remove two screws (M3 x 30).
The fan PC board is between the intake fan and the dust filter
holder.
Install intake fan air guide adapter, so air will not leak from the
sub frame assembly.
1-12
Explanation
Screw : type [M-3]
Screw : type [M-8]
TLPB2 Service Manual Rev. 2.0