About The Serial Ata Interface - Seagate ST500LX015 Product Manual

1.1 A S
BOUT THE ERIAL
The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages
include:
Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jumpers or other

configuration options.
Thinner and more flexible cabling for improved enclosure airflow and ease of installation.

Scalability to higher performance levels.

In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial ATA was
designed to allow users to install a Serial ATA host adapter and Serial ATA disk drive in the current system and expect all of
the existing applications to work as normal.
The Serial ATA interface connects each disk drive in a point-to-point configuration with the Serial ATA host adapter. There is
no master/slave relationship with Serial ATA devices like there is with parallel ATA. If two drives are attached on one Serial
ATA host adapter, the host operating system views the two devices as if they were both "masters" on two separate ports. This
essentially means both drives behave as if they are Device 0 (master) devices.
The host adapter may, optionally, emulate a master/slave environment to host software
where two devices on separate Serial ATA ports are represented to host software as a
Device 0 (master) and Device 1 (slave) accessed at the same set of host bus
N
OTE
addresses. A host adapter that emulates a master/slave environment manages two
sets of shadow registers. This is not a typical Serial ATA environment.
The Serial ATA host adapter and drive share the function of emulating parallel ATA device behavior to provide backward
compatibility with existing host systems and software. The Command and Control Block registers, PIO and DMA data
transfers, resets, and interrupts are all emulated.
The Serial ATA host adapter contains a set of registers that shadow the contents of the traditional device registers, referred
to as the Shadow Register Block. All Serial ATA devices behave like Device 0 devices. For additional information about how
Serial ATA emulates parallel ATA, refer to the Serial ATA International Organization: Serial ATA (Revision 3.2). The
specification can be downloaded from www.serialata.org.
S U M SSHD P
EAGATE LTRA OBILE
ATA I
NTERFACE
M , R . D
RODUCT ANUAL EV
3