Advertisement
Quick Links
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
CAUTION: HEAVY ITEM
ASSEMBLY INSTRUCTION
LA SALLE DRESSER WITH MIRROR
ITEM CODE 64529
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Amart Furniture SIGNATURE 64529
Summary of Contents for Amart Furniture SIGNATURE 64529
- Page 1 LA SALLE DRESSER WITH MIRROR ITEM CODE 64529 CAUTION: HEAVY ITEM Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please phone Amart Furniture, Customer Service Free call 1800 351 084...
- Page 2 IMPORTANT: CARE GUIDE FOR YOUR TIMBER FURNITURE • Congratulations! You have just purchased a quality product from Amart Furniture. Please read on for important information regarding your purchase. • A multi-step finish is applied to all our furniture, but all wood comes from nature.
-
Page 3: Pre-Assembly Preparation
PRE-ASSEMBLY PREPARATION Before you start: Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product Take care when lifting. Product should be assembled as near as possible to the point of use Ensure that you have all required contents for complete assembly Always read the assembly instructions carefully before beginning assembly. -
Page 4: Parts List
PARTS LIST Part DESCRIPTION In box DRESSER MIRROR SUPPORT BAR A M6 X 45 BOLT B M6.5 X 19 FLAT C M6.5 X 9 D ALLEN KEY 1 PCE PCES WASHER PCES SPRING PCES WASHER... - Page 5 Step 1 You will need to assemble the M6 x 45 bolts (item A) with the M6.5 x 9 spring washers (item C) and the M6.5 x 19 flat washers (item B) YOU WILL NEED A M6 X 45 BOLT B M6.5 X 19 FLAT C M6.5 X 9 D ALLEN KEY...
- Page 6 Step 4 Next you will need to assemble the M6 x 45 bolts (item A) with the M6.5 x 9 spring washers (item C) and the M6.5 x 19 flat washers (item A M6 X 45 BOLT B M6.5 X 19 FLAT C M6.5 X 9 D ALLEN KEY 1 PCE...
- Page 7 Removing the handles Handles are installed on the inside for their own protection during transport. You will need to unscrew them and reattach them before use. Step 1 Start by opening drawer with the string attached. Take a Phillips head screw driver and turn the screws counter clockwise.
- Page 8 Attaching the anti-tipping kit. As wall types vary, we do not supply the screws that you will need, to fasten onto your wall. Please seek advice from you trusted local specialist. Step 1 Attach one of the anchors to the back of the dresser. Step 2 Mark the spot on the wall that will best line up with the anchors already fixed on the unit.
- Page 9 Assembly is complete...
Need help?
Do you have a question about the SIGNATURE 64529 and is the answer not in the manual?
Questions and answers